HŰTŐFOLYADÉK SZIVATTYÚ
ACP-HMFS
The pumps in this series are mainly used in CNC-lathes and CNC-machining centers due to their high pressure and sufficient flow rate (used as original installation for example in South Korean machine tools Doosan, Hyundai, Samsung and Hwacheon).
The pump is designed in such a way that heat transfer is minimal between the motor and the pump.
ACP-HMFD
The pumps in this series are mainly used in CNC-lathes and CNC-machining centers due to their high pressure and sufficient flow rate (used as original installation for example in South Korean machine tools Doosan, Hyundai, Samsung and Hwacheon).
The pump is designed in such a way that heat transfer is minimal between the motor and the pump.
ACPQ-HSP
The pumps in this series are mainly used in CNC-lathes and CNC-machining centers due to their high pressure and sufficient flow rate (used as original installation for example in South Korean machine tools Doosan, Hyundai, Samsung and Hwacheon).
The pump is designed in such a way that heat transfer is minimal between the motor and the pump.
The impeller is made of stainless steel, which prevents rusting.
ACP-MF
The pumps in this series are used mainly to wash chips from the covers down to the conveyor or to the bucket.
The pump is designed in such a way that heat transfer is minimal between the motor and the pump.
ACP-F/HF
The pumps in this series are submergible. The pump part is submerged in the tank so it doesn’t need extra fluid priming.
The design is compact and these pumps are widely used in conventional machine tools.
Idle time is not a problem because the pumps in this series don’t have mechanical seals.
ACP-A
The pumps in this series are self-suctioning and they are easy to install in small spaces. This series is used both in CNC- and conventional machines according to the needs of the target.
In the first operation of the pump, the suction room must be completely filled through the filling port.
ACH
ACH series pump is installed horizontally. Due to its small size it is easy to install in small spaces.
The pumps are mainly made of stainless steel.
The mechanical seal is made of FKM which endures high temperatures and ensures long life cycle.
ACHK
The pumps in this series can easily be used as replacements among others in Mori-Seiki and Mazak machine tools.
Pumps are mainly made of stainless steel.
The mechanical seal is made of FKM which endures high temperatures and ensures long life cycle
ATP-HAVB
In machine tools, these pumps are mainly used for CTS (coolant thru spindle operations). If you have an old/broken pump of similar type, you can send us the following information: size of the motor, type of the pump and size of the relief valve, and we can check if we have a substitute pump in our stock.
This pump has a relief valve to control the pressure.
These pumps can be used for pump oils or coolants, but you need to know which type you need before ordering.
VPC 160 screw pump (40 bar and 70 bar)
Applications
- High pressure pumps with low volumetric delivery
- Cutting, turning milling, boring, grinding and similar applications of machine tools
- Especially used for deep hole boring operations due to the high pressure up to 100 bar
- Pumping cutting/cooling fluids in circulation systems
Fluid Specifications:
- Coolants
- Cutting oils
- Grinding oil
- Emulsions (minimum 5% oil)
- Thermal oils (contact for detailed information)
- Kinematic viscosity 1…400 mm2 /s (contact for higher viscosities)
Cyclone Filter
Protects screwpumps from impurities
The storage model has 25 μm filtration as standard.
Also available with 5µm and 50µm filtration
70 bar, 40 bar or 20 bar coolant pump with filtration unit
Filtration unit and coolant pump cleverly combined in small space.
70bar pump with integrated filtration
ACFC-S-70-20A-TM is coolant filtration system with high pressure pump.
It is compact and well finished
HCP
Original coolant pump for some Doosan machines
